Laurel-electronics LAUREATE SERIES 2 SERIAL INPUT METER & REMOTE Instrukcja Użytkownika Pobierz pdf (Strona 25)

Input+Scaling tab. Works only with the Custom ASCII protocol, not the Modbus protocol,

since a meter cannot listen to commands while in the Rmt Dsply C display type.

Executing a Main Menu > Counter > Put Setup command downloads the setup information

into the meter, including the Rmt Dsply C display mode if selected. Do not execute a Main

Menu > Counter > Get Setup command if you have placed the meter into the Rmt Dsply C

mode, since normal meter communications cannot occur in that mode. Our Instrument

Setup Software will then reset the meter to Rmt Dsply A so that it can retrieve the setup

information from the meter.

For more information on serial communications, please download our Series 2 Serial Com-

munications Manual (for Custom ASCII Protocol) and our Series 2 Modbus Communications

Manual (for Modbus Protocol).

For Control Inputs, select the desired action of grounding Control Input 1, Control Input 2,

and both Control Inputs 1 and 2.

• Meter Reset is a master reset like removing and reapplying power.

• Function Reset resets latched alarms.

• Alarm Active allows external control of relays, as opposed to using normal setpoint

operation.

• Display Blanking blanks the meter display.

• Enable Tare enables a meter tare function and enters the current reading as a value to

be subtracted as a tare value.

• Tare if Enabled subtracts the tare value from the current reading.

Ignore the following selections, which do not apply to remote display operation: Peak,

Valley, External Gate, Meter Hold, Total A Reset, Total B Reset.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Brak uwag

Modely	Typ Dokumentu
N-50	Provozní pokyny Pioneer N-50 Operating instructions, 42 stránky
N-70A	Uživatelský manuál Pioneer N-70A User manual, 42 stránky

Laurel-electronics LAUREATE SERIES 2 SERIAL INPUT METER & REMOTE Instrukcja Użytkownika Strona 25