Laurel-electronics LAUREATE SERIES DPM Instrukcja Użytkownika Pobierz pdf (Strona 31)

-29-

Press the

key to display

dEcPt (Decimal point).

Press to display decimal

point location.

Use

to set digit values and

set to .00000 ( 0mV ).

Note: Most significant digit

may be set to 0 thru 9 and

-0 thru -9.

Press the

key to display

Lo in (Low signal input value).

Press to display value.

Press again to select

another digit. Note: Deci-

mal point is fixed by input

range selection.

Press to display value.

Note: Decimal point is fixed

by dEcPt selection.

Use

to set digit values and

set to 000.00

Use

to set digit values and

set to .02000 ( 20mV )

Press the

key to display

Hi in (High signal input value).

Press to display value.

Note: Decimal point is fixed

by input range selection.

Use

to set digit values and

set to 100.00

Press to display value.

Note: Decimal point is fixed

by dEcPt selection.

Press the

key to display

Hi rd (Desired meter reading

at high signal input).

DIGIT SELECT KEY VALUE SELECT KEY

Press

to select decimal

point location.

Press the

key. Continue to press

(or

and

simultaneously) until rESEt is

displayed. The meter will now go to the operating mode and display the value of the input signal.

1 2 3 4 5

Press the

key to display

SEtuP. (Basic setup). See

Section 9, Page 10 for de-

tailed description of selec-

tions for digits 1 through 5.

Press to display status.

Press

again to select

another digit. Selected digit

will flash.

Press

to select value.

Digit 1:"0"= 20,000 cts. FS

"2"=LSD fixed zero

"3"=2,000 cts. FS

Digit 4: "1" for 2 point scaling

Press the

key to display

Lo rd (Desired meter reading

at low signal input).

MENU KEY

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag

Laurel-electronics LAUREATE SERIES DPM Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Laurel-electronics LAUREATE SERIES DPM